Uncoated Optical Windows/Substrates

Clear Aperture: 19x29
Dimensions tolerance, mm: +0.0/-0.1
Dimensions, mm: 20x30
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.2-0.3 mm x 45°
S1 Flatness, PV: λ/8 @ 633 nm
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <1arcmin

Diameter, mm: 6 (+/-0.1 mm)
Thickness, mm: 2 (+/-0.1 mm)

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.05
Dimensions, mm: 24.9
Material: B270
Opticus comment: missing productID ref
Protective chamfers: <0.25 mm x 45°
S1 Surface quality, S-D: 80-50
S2 Surface quality, S-D: 80-50
Thickness tolerance, mm: ±0.05
Thickness, mm: 1.1
Wedge / Parallelism error: <3 arcmin

Material: UVFS (Corning 7980 0F)
Thickness, mm: 6 mm (+/-0.05 mm)
Surface quality, S1/S2: 10-5 S-D
S1 Flatness, PV IR S2 Flatness, PV: Parallelism error: <30 arcsec
Dimensions A x B x C, mm: 15 mm x 10 mm (+0/-0.1 mm)
Clear aperture: >90 %
Protective chamfers: 0.2-0.4 mm x 45 deg

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 6
Material: UVFS C7980 0F
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/4 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/4 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 24 x 29
Material: Zerodur
Opticus comment: missing productID ref
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/2 @ 632.8 nm
S1 Surface quality, S-D: 80-50
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 7.5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 11 x 9
Material: BK7
Protective chamfers: <0.5 mm x 45°
S1 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.05
Thickness, mm: 2
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <1 arcmin

Protective chamfers: 0.25 mm +/- 0.1 x 45 deg each edge
Clear Aperture: Central 10 mm
Diameter, mm: Ø12.7 mm, tolerance +0/-0.1 mm
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10 @ 632.8 nm
Surface Quality: 20-10 S/D

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.5
Dimensions, mm: 100 x 25
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/6 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: commercially polished
Thickness tolerance, mm: ±0.5
Thickness, mm: 10
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 9 x 7
Material: UVFS (Suprasil 300)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 9 x 7
Material: UVFS (Suprasil300)
Protective chamfers: 0.1-0.2mm @ 45 deg
S1 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10-λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.2
Dimensions, mm: 32
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.2-0.3 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.2
Thickness, mm: 6.35
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.2
Dimensions, mm: 32
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.2-0.3 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.2
Thickness, mm: 6.35
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <30 arcsec

Surface quality: 60/40
Thickness, mm: 2.4 mm
Surface Iregularities: 1F
Surface figure (Power): 4F
Mechanical wedge: <10 arc minutes
Dimensions A x B x C, mm: 41 x 41 mm
Material: Quartz optical grade

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: BK7
Shape: Round
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30x40
Material: UVFS
Shape: Rectangular
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Dimensions, mm: 2x2
Material: UVFS
Material: Corning 7980
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 10-5
Thickness, mm: 1
Wedge / Parallelism error: <5 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7x70
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Opticus comment: Grey background. Wedge along the long side
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x60
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: 1

Dimensions, mm: 150x150
Material: UVFS
S1 Surface quality, S-D: grinded
S2 Surface quality, S-D: grinded
Thickness, mm: 3.2-3.8
Clear aperture: >90

Dimensions, mm: 18x23
Material: UVFS
Opticus comment: missing productID ref
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 40-20
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Thickness tolerance, mm: ±0.1
S2 Flatness, PV: <λ/10-λ/8 @ 632.8nm
Thickness, mm: 2
S2 Surface quality, S-D: 40-20
S1 Flatness, PV: <λ/10-λ/8 @ 632.8nm
Clear Aperture: >90
Protective chamfers: <0.25 mm x 45°
Dimensions tolerance, mm: +0/-0.1
Dimensions, mm: 20 x 60
Wedge / Parallelism error: <20 arcsec
S1 Surface quality, S-D: 40-20

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions, mm: 20x20
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness, mm: 3

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
Shape: Round
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness, mm: 0.8
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions, mm: 24.2
Material: BK7
S1 Flatness, PV: <λ/2 @ 632.8 nm
S1 Surface quality, S-D: 60-40
S2 Surface quality, S-D: 60-40
Thickness, mm: 5
Wedge / Parallelism error: 12

Clear aperture: >90 %
Diameter, mm: 60 mm (+0/-0.1mm)
Material: UVFS
Parallelism error: <1 arcmin
Protective chamfers: 0,2 – 0,3 mm x 45°
Surface quality, S1/S2: 20-10 S-D
Thickness, mm: 3 mm (+0/-0.1mm)
Transmitted wavefront distortion, PV: λ/[email protected]

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <1 arcmin
Wedge / Parallelism error: 30 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 56x79.20
Material: FS
Shape: Elliptic
S1 Flatness, PV IR S2 Flatness, PV: <λ/6
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3

Clear aperture: >90
Comments: S1/S2: grinded
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8
Material: S-TIH-53
S1 Flatness, PV: <λ/8 @ 632.8 nm
Thickness tolerance, mm: ±0.1
Thickness, mm: 5

Clear aperture: >90
Comments: S1/S2: grinded
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8
Material: S-BS S-BSM-22
S1 Flatness, PV: <λ/8 @ 632.8 nm
Thickness tolerance, mm: ±0.1
Thickness, mm: 5

Comments: S1/S2: grinded
Dimensions, mm: 13
Material: S-TIH-53
S1 Flatness, PV: <λ/8 @ 632.8 nm
Thickness, mm: 5

Clear aperture: >90
Comments: S1/S2: grinded
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 13
Material: S-BS S-BSM-22
S1 Flatness, PV: <λ/8 @ 632.8 nm
Thickness tolerance, mm: ±0.1
Thickness, mm: 5

Clear aperture: >90
Comments: Flatness(S2): <λ/4
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 6
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: 30 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 38.1
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x30
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 71.84 x 50.8
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.2-0.4 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/4 @ 632.8 nm
S2 Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 12
Wedge / Parallelism error: <1 arcmin

S1 (wedged): Uncoated
Wedge / Parallelism error: 4 deg +/-3 arcmin
Thickness, mm: 5 mm (+/-0.1mm)
Surface quality: 20/10 S/D
S2: Uncoated
Material: Suprasil 2A (OH content 1 ppm)
Diameter, mm: 8 mm (+0/-0.1mm)
Coatings:
S1 Flatness, PV IR S2 Flatness, PV: L/[email protected]

Parallelism Face 1 % Face 2 (Wedge): 60 (+/-10) arcmin
Circumference finish: fine grounding
Configuration: Plano/Plano
Surface quality: 10/5 S/D
S1 Flatness, PV IR S2 Flatness, PV: 0,1 λ@ 633nm before coating @ 0° AOI
Protective chamfers: <0,5mm @ 45
Material: UVFS
Length: 25 (+0/-0.1) mm
Height: 85 (+0/-0.1) mm
Edge thickness, mm: 10 (+/-0.1) mm
Clear Aperture: Best fit ellipse over 85% of area
Coatings: uncoated

Clear aperture: >90
Comments: T>50%@200 + T>80%@4300
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 58
Material: Sapphire
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 80-50
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <5 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 130x180
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 25.4
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 184
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3.8
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 63x152
Opticus comment: missing productID ref
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 12.5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12x15
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 44
Material: B270
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 1.5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 5
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/2
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 1.3

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Opticus comment: Gray background
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: MgF2
S1 Flatness, PV IR S2 Flatness, PV: <λ/2
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Comments: Theta: 29.7°
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 10x10
Material: Sapphire
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <2 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 21.5
Material: FS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6.5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 14x25
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <10 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7x15
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions, mm: 20
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness, mm: 4
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 15
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/6
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: 1°

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 38.1
Material: UVFS
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 8
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 50.8
Material: Sapphire
S1 Flatness, PV IR S2 Flatness, PV: <λ
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Comments: S1/S2: grinded
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 15
Material: N-KF-9
Shape: Round
Thickness tolerance, mm: ±0.1
Thickness, mm: 7

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/3 - <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 38.1x76.2
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 10
Wedge / Parallelism error: <3 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 32
Material: UVFS
Material: Corning 7980 (OF)
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <20 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.9
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3.9
Wedge / Parallelism error: <1 arcmin

Coatings: None. C-plane parallel bevel
Diameter, mm: 50.8 mm (±0.1 mm)
Edges: ground finished
S1 Flatness, PV IR S2 Flatness, PV: < 10 µm
Material: High Purity (99.99%) single crystal Sapphire,
Orientation tolerance: within 2deg
S1: Epi-polished
S2: optically polished
Surface finish:
Surface Roughness (Ra): < 0.2 nm
Thickness, um: 0.430-0.500 (in this range)

Coatings: None. A-plane parallel bevel
Diameter, mm: 50.8 mm (±0.1 mm)
Edges: ground finished
S1 Flatness, PV IR S2 Flatness, PV: < 10 µm
Material: High Purity (99.99%) single crystal Sapphire,
Orientation tolerance: within 2deg
S1: Epi-polished
S2: optically polished
Surface finish:
Surface Roughness (Ra): < 0.2 nm
Thickness, um: 0.430 (±10 um)

Clear aperture: >80
Comments: Transmission > 50% at 200nm and >80% at 4.3 µm.
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 58
Material: Sapphire
S1 Flatness, PV IR S2 Flatness, PV: 2.5λ
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <5 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30
S1 Flatness, PV IR S2 Flatness, PV: <λ/6 @ 632.8 nm
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/6
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: 3°

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 6.4x8.5
Material: BK7
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 20-10
Thickness, mm: 0.1
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 100x30.1
Material: BK7
S1 Surface quality, S-D: 40-20
S2 Surface quality, S-D: grinded
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Thickness tolerance, mm: ±0.1
Thickness, mm: 20.09

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: λ/8
Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: IRFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <10 arcmin

External diameter: 2.5mm
Internal diameter: 0.13mm
Length: 10mm
Material: UVFS

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8x8
Material: SF57
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8x8
Material: SF57
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.01
Thickness, mm: 28.78
Wedge / Parallelism error: <1 arcmin

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 30
Wedge / Parallelism error: <1 arcmin

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 30
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 7x10
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <0.25 deg

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 70x105
Material: KG-2 SCHOTT
Shape: Rectangular
Thickness tolerance, mm: ±0.1
Thickness, mm: 8

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: KG-2 SCHOTT
Thickness tolerance, mm: ±0.1
Thickness, mm: 5.5

Comments: Cut to: 40.6±0.1 x 35±0.1 mm (per drawing)
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 48.1
Material: BK7
Shape: D-shape
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 0.5
Wedge / Parallelism error: <3 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 10 x 15
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/6
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 15
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Material: BK7
Wedge / Parallelism error: <1 arcmin
Thickness, mm: 3
Thickness tolerance, mm: ±0.1
Clear aperture: >90
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Dimensions, mm: 25
Dimensions tolerance, mm: (+0/-0.1)
Surface quality, S-D: 20-10

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture:
Opticus comment: -
Comments: S1/S2: grinded
Dimensions tolerance, mm:
Dimensions, mm: 18
Material: NG-3 SCHOTT
Material: -
Opticus comment: missing productID ref
Protective chamfers:
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D:
S2 Flatness, PV:
S2 Surface quality, S-D:
Shape: Round
S1 Flatness, PV IR S2 Flatness, PV: -
S1 Flatness, PV IR S2 Flatness, PV:
Surface quality, S-D: -
Thickness tolerance, mm:
Thickness, mm: 2
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <0.5 deg
Wedge / Parallelism error: No wedge

Clear aperture: >90
Comments: S1/S2: grinded
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 18
Material: NG-1 SCHOTT
Thickness tolerance, mm: ±0.1
Thickness, mm: 2

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: IRFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 85
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 15
Wedge / Parallelism error: <5 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 6x8.5
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2

Central hole diameter: 3.10 mm
Dimensions tolerance, mm: ±0.05
Dimensions, mm: 9
Material: B270
S1 Flatness, PV IR S2 Flatness, PV: <λ - <2λ
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.05
Thickness, mm: 0.7

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 101.6
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 21.59
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 50.8
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/2 - λ/3
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 8
Wedge / Parallelism error: <1 arcmin

Comments: Central hole diameter: 3.10 mm
Dimensions tolerance, mm: ±0.05
Dimensions, mm: 9
Material: B270
S1 Flatness, PV IR S2 Flatness, PV: <λ - <2λ
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.05
Thickness, mm: 0.7

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 6x11
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 2.2
Wedge / Parallelism error: <30 arcsec

Clear aperture: 90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <5 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: 5 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 30
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: 80
Dimensions tolerance, mm: (+0/-0.25)
Dimensions, mm: 46x65
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: no flatness requirement
S2 Surface quality, S-D: Fine ground
Thickness tolerance, mm: +0/-0.25
Thickness, mm: 15
Wedge / Parallelism error: <1 arcmin

Wedge / Parallelism error: <30 arcsec
Thickness, mm: 2
Thickness tolerance, mm: ±0.1
Protective chamfers: <0.2 mm x 45°
S2 Surface quality, S-D: 10-5
S1 Flatness, PV: <λ/10 @ 632.8 nm
Material: UVFS
Dimensions, mm: 12.7
Dimensions tolerance, mm: (+0/-0.1)
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
Clear aperture: >90

Clear aperture: 80
Comments: CA=80%. No chamfer on one side
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: BK7
Opticus comment: missing productID ref
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: UVFS
Material: Corning 7980 (OF)
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <10 arcsec

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: Pyrex
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 1.25
Wedge / Parallelism error: <1 arcmin

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x60
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <10 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: IRFS
Material: Infrasil 302
Shape: Rectangular
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 10

Wedge / Parallelism error: <30 arcsec
Thickness, mm: 3
Thickness tolerance, mm: ±0.1
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
Protective chamfers: 0.2 mm x 45°
Material: UVFS
Dimensions, mm: 20
Dimensions tolerance, mm: (+0/-0.1)
S2 Surface quality, S-D: 10-5
S1 Flatness, PV: <λ/10 @ 632.8 nm
Clear aperture: >90

Protective chamfers: none
Wedge / Parallelism error: 5 deg (+/-1 deg)
Quality of barrel face polishing: 80/50 S/D
Material: Suprasil 300
Height: 5 mm (+/- 1 mm)
Diameter of top face: 1 mm (+/-0.1 mm)
Diameter of bottom face: 5 mm (+/-0.2 mm)
Coatings: none
Surface quality of top and bottom faces: 60/40 S/D

Protective chamfers: none
Diameter of top face: 1 mm (+/-0.1 mm)
Wedge / Parallelism error: 5 deg (+/-1 deg)
Surface quality of top and bottom faces: 60/40 S/D
Quality of barrel face polishing: 80/50 S/D
Height: 5 mm (+/- 1 mm)
Material: Suprasil 300
Diameter of bottom face: 5 mm (+/-0.2 mm)
Coatings: none

Material: UVFS (Corning 7980 0F)
Thickness, mm: 3
Thickness tolerance, mm: ±0.2
Protective chamfers: <0.25 mm x 45°
Wedge / Parallelism error: <30 arcsec
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Dimensions, mm: 20
Dimensions tolerance, mm: (+0/-0.1)
Clear aperture: >90
Surface quality, S-D: 10-5

Dimensions, mm: 25
Material: IRFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 - <λ/3
Surface quality, S-D: 20-10
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Dimensions, mm: 25
Material: IRFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 - <λ/10
Surface quality, S-D: 10-5
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 44
Material: UVFS
Material: Corning 7980 (OF)
Shape: Round
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 44
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <1 arcmin

Dimensions, mm: 40
Material: BK7
S1 Flatness, PV: <λ/4 @ 632.8 nm
S1 Surface quality, S-D: 40-20
S2 Flatness, PV: <λ/4 @ 632.8 nm
S2 Surface quality, S-D: 40-20
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture:
Opticus comment: -
Comments: -
Dimensions tolerance, mm:
Dimensions, mm: 20
Material: UVFS
Material: -
Opticus comment: missing productID ref
Protective chamfers:
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D:
S2 Flatness, PV:
S2 Surface quality, S-D:
Shape: Round
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
S1 Flatness, PV IR S2 Flatness, PV:
Surface quality, S-D: 20-10
Thickness tolerance, mm:
Thickness, mm: 4
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <0.5 deg
Wedge / Parallelism error: 4

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Dimensions tolerance, mm: +0/-0.05
Dimensions, mm: 10 x 12
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4 x 25.4
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/5
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <3 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20 x 40
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <10 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Material: BK7
Surface quality, S-D: 20-10
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8x8
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2: grinded
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 5
Wedge / Parallelism error: 1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8x8
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2: grinded
Surface quality, S-D: 20-10
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 5
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 8x8
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 40-20
S2: grinded
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 5
Wedge / Parallelism error: 1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.2
Dimensions, mm: 40
Material: Q1-E (Eximer grade UV FS)
S1 Flatness, PV IR S2 Flatness, PV: <λ/3 - <λ
Surface quality, S-D: 60-40
Thickness tolerance, mm: +/-0.2
Thickness, mm: 1
Wedge / Parallelism error: 2 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 6.5x9
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Surface quality, S-D: grinded
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions, mm: 40x70
Material: BK7
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 20-10
Thickness, mm: 10

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 112
Material: UVFS
Protective chamfers: <0.3 mm x 45°
S1 Flatness, PV: <λ/4 @ 632.8 nm over 25.4 mm
S1 Surface quality, S-D: 40-20
S2 Flatness, PV: <λ/4 @ 632.8 nm over 25.4 mm
S2 Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Transmitted wavefront distortion, PV: <λ/4 @ 632.8 nm over 25.4 mm
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions, mm: 25.4
Material: Sapphire
Orientation: Random
S1 Flatness, PV: <λ @ 632.8 nm
S1 Surface quality, S-D: 80-50
S2 Flatness, PV: <λ @ 632.8 nm
S2 Surface quality, S-D: 80-50
Thickness, mm: 0.5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x30
Material: UVFS (Corning 7980 0F)
Protective chamfers: <0.2 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x30
S1 Flatness, PV IR S2 Flatness, PV: <λ/10 @ 632.8 nm
Material: UVFS
Protective chamfers: <0.2 mm x 45°
Surface quality, S-D: 40-20
Thickness tolerance, mm: +0/-0.1
Thickness, mm: 6.35
Wedge / Parallelism error: <30 arcsec

S1 Flatness, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <1 arcmin
Thickness, mm: 4
Thickness tolerance, mm: ±0.1
S2 Surface quality, S-D: 20-10
S1 Surface quality, S-D: 20-10
Protective chamfers: <0.25 mm x 45°
Material: undoped YAG
Dimensions, mm: 25.4
Dimensions tolerance, mm: (+0/-0.1)
Clear aperture: >90
S2 Flatness, PV: <λ/8 @ 632.8 nm

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 112
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm per 25.4 mm
Material: UVFS
Material: Corning 7980 (OF)
Protective chamfers: 0.3 mm x 45°
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <30 arcsec

Dimensions, mm: 150x150
Material: UVFS
Material: Viosil SQ
S1/S2: grinded
Thickness, mm: 2.02-2.06

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.25)
Dimensions, mm: 46x65
Material: UVFS (Corning 7980 0F)
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Surface quality, S-D: Fine ground
Thickness tolerance, mm: +0/-0.25
Thickness, mm: 15

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 76.2
Material: UVFS
Material: Viosil SQ
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +/-0.25
Dimensions, mm: 60x85
Material: BK7
Protective chamfers: <0.5 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: +/-0.25
Thickness, mm: 15
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +/-0.25
Dimensions, mm: 60x85
Material: BK7
Protective chamfers: <0.5 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: +/-0.25
Thickness, mm: 15
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Surface quality, S-D: 20-5
S2 Surface quality, S-D: 20-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Transmitted wavefront distortion, PV: <λ/10 @ 632.8 nm
Wedge / Parallelism error: <5 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: UVFS
Protective chamfers: <0.5 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 10
Wedge / Parallelism error: 1

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS
S1 Flatness, PV: <λ/10 @ 632.8 nm
S2 Flatness, PV: <λ/4 @ 632.8 nm
Shape: D-shape
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 10
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.01
Thickness, mm: 0.5
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0.00/-0.02)
Dimensions, mm: 50
Material: UVFS (C7980)
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2.4
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <1 arcmin
Wedge / Parallelism error: No wedge

Clear aperture: >90
Dimensions, mm: 50.8
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 10
Wedge / Parallelism error: 3°

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
S1 Flatness, PV IR S2 Flatness, PV: <λ/6 @ 632.8 nm
Material: UVFS (C7980)
Protective chamfers: <0.2 mm x 45°
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: 5

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 76.2
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/5
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 8
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.05
Dimensions, mm: 16.9
Material: UVFS (Corning 7980 0F)
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: 30 arcmin (+/-5 arcmin)

Clear aperture: >90
Dimensions tolerance, mm: +0.0/-0.05
Dimensions, mm: 16.9
Material: UVFS (C7980)
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: 30 (±5) arcmin

S1 Surface quality, S-D: 20-10
S1 Flatness, PV: λ/8 @ 633 nm
Wedge / Parallelism error: <5 arcmin
Thickness, mm: 6
S2 Flatness, PV: λ/[email protected] 633 nm
S2 Surface quality, S-D: 20-10
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.3-0.5 mm x 45°
Dimensions, mm: 40
Clear aperture: >90

Protective chamfers: 0.3-0.5 mm x 45°
Thickness, mm: 6
S2 Surface quality, S-D: 40-20
S2 Flatness, PV: <λ/8 @ 632.8 nm
S1 Flatness, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <2arcmin
Material: UVFS (Corning 7980 0F)
Dimensions, mm: 40
Clear aperture: 90
S1 Surface quality, S-D: 40-20

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 9.53

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 9.53

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: 30 ±10 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25
Material: UVFS
Protective chamfers: <0.2 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12x15
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Dimensions, mm: 20 x 60
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/10-λ/8 @ 632.8nm
S1 Surface quality, S-D: 40-20
S2 Flatness, PV: <λ/10-λ/8 @ 632.8nm
S2 Surface quality, S-D: 40-20
Thickness, mm: 5
Wedge / Parallelism error: 1° ± 5 arcmin

Protective chamfers: 0.1-0.2 mm x 45°
Thickness, mm: 2
Thickness tolerance, mm: ±0.1
Surface quality, S-D: 20-10
S1 Flatness, PV IR S2 Flatness, PV: <λ/5
Material: UVFS (Viosil SQ)
Dimensions, mm: 20x60
Clear aperture: >90
Wedge / Parallelism error: <30 arcsec
Dimensions tolerance, mm: (+0/-0.1)

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
S1 Flatness, PV IR S2 Flatness, PV: <λ/10 @ 632.8 nm
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: grinded
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.2
Dimensions, mm: 20
Material: BK7
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/8 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness, mm: 5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: BK7
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 7
Material: BK7
Protective chamfers: 0.1-0.3 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x60
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Transmitted wavefront distortion, PV:
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
S1 Flatness, PV IR S2 Flatness, PV: <λ/2 @ 632.8 nm
Material: MgF2
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 60-40
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25x245
Material: BK7
Protective chamfers: 1 mm x 45°
S1 Flatness, PV: <λ/4 @ 632.8 nm
S1 Surface quality, S-D: 60-40
S2 Surface quality, S-D: Fine ground
Thickness tolerance, mm: ±0.1
Thickness, mm: 20
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS (C7980)
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.2
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <10 arcsec

Clear aperture: >90
Comments: All sides cut at 45°
Dimensions tolerance, mm: +0/-0.3
Dimensions, mm: 25x35
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/8 @ 632.8 nm
S1 Surface quality, S-D: 40-20
Thickness tolerance, mm: +0/-0.2
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions, mm: 25
Material: B270
Surface quality, S-D: 40-20
Thickness, mm: 1
Transmitted wavefront distortion, PV: <λ @ 632.8 nm
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x40
Material: BK7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 3
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12x15
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 12.7
Material: UVFS (Viosil SQ)
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions, mm: 20x50
Material: BK7
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: 20-10
Thickness, mm: 0.5
Transmitted wavefront distortion, PV: <λ/4 @ 632.8 nm
Wedge / Parallelism error: 10° ±5 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/-0.12
Dimensions, mm: 30x60
Material: UVFS
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/4 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Flatness, PV: <λ/4 @ 632.8 nm
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.2
Thickness, mm: 5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 14
Material: UVFS (Suprasil 2A)
Protective chamfers: 0.1-0.3 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/2
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 1
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS (C7980)
Protective chamfers: 0.3 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: +0/-0.025
Thickness, mm: 28.78
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.3 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 30
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS (Corning 7980 0F)
Protective chamfers: 0.3 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.025
Thickness, mm: 28.78
Wedge / Parallelism error: <1 arcmin

Dimensions, mm: 30
S1 Flatness, PV IR S2 Flatness, PV: <λ-λ/2
Material: BK7
Surface quality, S-D: 40-20
Thickness, mm: 1.5
Wedge / Parallelism error: <30 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 7x12
Material: BK7
Protective chamfers: 0.2-0.5 mm x 45°
S1 Flatness, PV: <λ/10 @ 632.8 nm
S1 Surface quality, S-D: 10-5
S2 Flatness, PV: <λ/10 @ 632.8 nm
S2 Surface quality, S-D: 10-5
Thickness tolerance, mm: ±0.1
Thickness, mm: 2.2

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 7x12
Material: BK7
Protective chamfers: 0.2-0.5 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/10
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2.2

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4 x 12.7
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4 x 12.7
Material: BK7
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV: <λ/7 @ 632.8 nm
S1 Surface quality, S-D: 20-10
S2 Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 6
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: +0/‐0.5
Dimensions, mm: 12.5
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Material: UVFS
Protective chamfers: <0.3 mm x 45°
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Wedge / Parallelism error: <30arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 25.4
Material: UVFS (Corning 7980 0F)
Protective chamfers: <0.25 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 9.53
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Surface quality, S-D: 40-20
S2 Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <5 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS
Protective chamfers: 0.1-0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 40-20
Thickness tolerance, mm: ±0.1
Thickness, mm: 2
Transmitted wavefront distortion, PV: <λ/8 @ 632.8 nm
Wedge / Parallelism error: <5 arcsec

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20
Material: UVFS (Corning 7980 0F)
Protective chamfers: <0.2 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 5
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 20x19.7
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness, mm: 5

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 15 x 15
Material: UVFS
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Surface quality, S-D: 20-10
Thickness tolerance, mm: ±0.1
Thickness, mm: 17
Wedge / Parallelism error: <1 arcmin

Clear aperture: >90
Dimensions tolerance, mm: (+0/-0.1)
Dimensions, mm: 15
Material: UVFS (Viosil SQ)
Protective chamfers: 0.3 mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: <λ/8
Sur