Brewster Angle Dispersing Prisms For Ultrashort Pulses

Is a formal quotation necessary to order?

If so, please fill the following form. Do not forget to specify SKUs of the items and Your billing information:

Page: first prev next last
Grouped product items
SKU Specifications Stock Qty Price Add to cart
9000170
Angle tolerance: ±3 arcmin
Apex angle, °: 69.06
Clear aperture: >80
Dimensions A x L, mm: 25.4 x 25.4
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/10 @ 632.8 nm
Material: UVFS
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 20-10
1
€130.00
9419871
Comments: Crack inside of the edge.
Dimensions A x L, mm: 25.4 x 25.4
Material: UVFS
Surface quality, S-D: 20-10 after coating
Apex angle, °: 69.06
1
€129.00
9538253
NEW
Apex angle, °: 69.06 (±3 arcmin)
AR coatings: uncoated
Clear Aperture: >80
Dimensions A x L, mm: 30 x 30 (+0/-0.2)
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 633 nm
Material: UVFS
Protective chamfers: 0.1-0.25 mm x 45°
Surface quality, S-D: 20-10
3
€160.00
9581228
Angles: 60 deg +/- 2 arcmin
Clear aperture: >80 %
Coatings: Uncoated
Dimensions A x B x C, mm: 12.7 x 12.7 x 12.7 (+0.0/-0.3 mm)
Length: 12.7 mm(+0.0/-0.2 mm)
Material: Sf11
Pyramidal error: ±1 arcmin
Protective chamfers: <0.25 mm x 45 deg
S1 Flatness, PV IR S2 Flatness, PV: <λ/4@ 632.8 nm
Surface quality S1/S2: 40/20 S/D
1
€78.00
Page: first prev next last

Dispersing prisms are essential parts in most of ultrashort pulse laser systems. These prisms are used intracavity to compensate for dispersion of fixed cavity optics, such as active gain medium. But in most of cases they are used as extra-cavity elements to manipulate pulse characteristics.

Three materials with different dispersive properties are available. For the highest group velocity dispersion dense SF10 is used. Prisms made of SF10 feature GVD of ~1600 fs²/cm. GVD is equal to ~350 fs²/cm in case of fused silica.

Standard prisms feature high surface quality and flatness and only high purity optical materials are used in production. Prisms are designed in a way to satisfy condition of minimum loss due to entrance and exit at Brewster's angle.

  • High surface quality and flatness
  • Precisely cut at Brewster's angle
  • Minimal Fresnel losses

Is a formal quotation necessary to order?

If so, please fill the following form. Do not forget to specify SKUs of the items and Your billing information:

Did not find what you need?

Please fill this form and we will get back to You:


 Secure payment

Copyright © 2013-present Opticus, UAB. All rights reserved.