Product ID Specifications Price Qty In Stock Qty Buy
9003050
90˚ angle tolerance, arcsec: ±2
Coatings: AR (R < 0.3%) @ 1535 nm
Dimensions, mm: 5 x 5 x 7.1 (±0.2)
Durability: per MIL-M-13508C
Edge chips, μm: < 5
LIDT: > 1 GW/cm² @ 1535 nm, 10 ns pulse, repetition rate 1 Hz
Material: BK7
Part No: 3730 828 1
Pyramidal tolerance, arcmin: <1
Protective chamfers: <0.25 mm x 45° on all edges except roof edge
Reflected WFD, fringes: 0.05 (RMS) and 0.2 (P-V) @ 633 nm
Surface flatness, fringes: <1/4 on all faces
Surface quality: 20-10 S-D<
7.00
1
9324582
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: [email protected]
Dimensions A x B x C, mm: 30 x 30 x 30
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
95.00
1
9325032
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: [email protected]
Dimensions A x B x C, mm: 30 x 30 x 30
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
150.00
2
9327032
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 50.8 x 50.8 x 50.8
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
150.00
1
9328882
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: [email protected]
Dimensions A x B x C, mm: 12.7 x 12.7 x 12.7
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: UVFS
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
110.00
1
9330183
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: [email protected]
Dimensions A x B x C, mm: 28.2 x 28.2 x 175
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 60-40
388.00
1
9337023
90° angle tolerance: ±3 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 10 x 15
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
90.00
2
9352845
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 25 x 25 x 25
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: ±1 arcmin
Surface quality, S-D: 40-20
113.00
1
9352985
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: Silver+SiO2 coated
Dimensions A x B x C, mm: 20 x 20 x 20
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
90.00
1
9376767
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Comments: Suprasil ULV
Dimensions A x B x C, mm: 10 x 10 x 10
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: UVFS
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
110.00
2
9391489
90° angle tolerance: ±10 arcsec
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 10 x 10 x 10
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: UVFS
Pyramidal tolerance: <1 arcmin
Surface quality, S-D: 40-20
32.00
3
9416641
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 25.39 x 25.14 x 25.08
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
32.00
2
9420582
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: S1: Enhanced Aluminum.R>95%@450-650nm
Dimensions A x B x C, mm: 40 x 40 x 56.6
S1 Flatness, PV IR S2 Flatness, PV: <λ/10 @ 632.8 nm
Material: N-BK7
Pyramidal tolerance: <1 arcmin
Surface quality, S-D: 40-20
80.00
3
9420592
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: S1: Enhanced Aluminum.R>95%@450-650nm
Dimensions A x B x C, mm: 30 x 30 x 42.4
Dimensions tolerance, mm: (+0/-0.1)
S1 Flatness, PV IR S2 Flatness, PV: <λ/8 @ 632.8 nm
Material: N-BK7
Pyramidal tolerance: <1 arcmin
Surface quality, S-D: 40-20
60.00
2
9421252
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 20 x 20 x 20
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <9.5 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
33.00
2
9421572
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 12.7 x 12.7 x 12.7
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Surface quality, S-D: 40-20
Comment: Al coating on long surface.
23.00
5
9423652
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 25.4 x 25.4 x 25.4
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: N-BK7
Surface quality, S-D: 20-10
32.00
1
9426902
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 25.4 x 25.4 x 25.4
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
32.00
2
9428512
90° angle tolerance: ±2 arcsec
Clear aperture: >80
Coatings: AR(R<0.3%)@1535 nm
Dimensions A x B x C, mm: 5 x 5 x 5
Dimensions tolerance, mm: ±0.2
Material: BK7
Pyramidal tolerance: <1 arcmin
Surface quality, S-D: 20-10
14.00
2
9428772
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 12.7 x 12.7 x 12.7
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: UVFS
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 40-20
52.00
1
9433823
90° angle tolerance: ±2 arcmin
Clear aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 10 x 10 x 10
Dimensions tolerance, mm: +0/-0.2
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: UVFS
Pyramidal tolerance: <1 arcmin
Protective chamfers: <0.25 mm x 45°
Surface quality, S-D: 60-40
32.00
3
9513431
90° angle tolerance: ±2 arcmin
Clear Aperture: >80
Coatings: uncoated
Dimensions A x B x C, mm: 20.0 x 20.0 x 20.0 (+0/-0.2)
S1 Flatness, PV IR S2 Flatness, PV: <λ/4 @ 632.8 nm
Material: BK7
Pyramidal tolerance: ±1 arcmin
Protective chamfers: 0.1-0.25 mm x 45°
Surface quality, S-D: 40-20
31.00
1
9564766
3 sides polished flatness: 3/0.25(0.1) ; 5/1x0.1 --> L/5
90° angle tolerance: ±2 arcmin
Clear Aperture: >90
Coatings: uncoated
Dimensions A x L, mm: 12 x 12 (+0/-0.1)
Material: N-BK7
Perpendicularity: ±1 arcmin
Pyramidal tolerance: for 90° ±1 arcmin; for 45° ±1 arcmin
Protective chamfers: <0.1 mm x 45°
Comment: + 1 chamfer 3.5±0.1 at 45° as per drawing
Comment: 45°±3 arcmin
Comment: see drawing for all specs and tolerances
25.00
2
9574167
90° angle tolerance: +/-5 arcmin
Clear aperture: >90%
Dimensions, mm: 10 x 10 x 10 (+0/-0.2)
Material: BK7
Protective chamfers: <0.25mm x 45°
S1 Flatness, PV IR S2 Flatness, PV: λ/4 @ 632.8nm
Surface quality, S-D: 60-40
Comment: Uncoated
16.00
5
9588308
90 deg angle tolerance: +/- 1 arcmin
Clear aperture: >80 %
Coatings on hypotenuse: Aluminium coating
Dimensions A x B x C, mm: 12.7 x 12.7 x 12.7 mm (+0/-0.2 mm)
Material: BK7
Pyramidal tolerance: +/- 1 arcmin
Protective chamfers: 0.2-0.3 mm x 45 deg
Surface flatness, S1/S2/S3: Surface quality, S1/S2/S3: 40-20 S-D
18.00
6
Total: $0.00
Ex Tax: $0.00
0
Right-Angle prisms are often preferable to an inclined mirror in applications involving severe acoustic or inertial loads, because they are easier to mount, and deform much less than mirror in response to external mechanical stress. As long as acceptance angle limitations for TIR from the roof faces are not exceeded, the right angle prisms can serve as a retro reflector, turning beams back to the original direction. 
  • Can work as internal or external reflectors or as retroreflectors

Right-Angle Prisms

  • Product Code: PR
  • Availability: In Stock




High Quality

Fast Shipping

Defect Free Warranty

Products fits ISO 9001:2008 standarts

Dispatch in 1 week or less

Claims are accepted for 3 months