9814091

Wedge along 8 mm side: 1° (±0.016°)
S1/S2 Surface form error, fr: 3/ 0.4 (0.2)
S1/S2 Surface quality: 5/ 2 x 0.025
S1/S2 Test area, mm: Ø2 central CA
S1: PR(R=60±2%) @ 1029-1031 nm, AOI = 0°
S1: PR(R=60±2%) @ 1029-1031 nm, AOI = 0°, 25J/cm²; 1030 nm; 10 ns
S2: AR(R<0.2%) @ 1029-1031 nm, AOI = 0°
Thickness of thicker edge, mm: 3.1 (±0.1)
S1/S2 Surface form error, fr: 3/ 0.4 (0.2) (<λ/10 @ 633 nm)
Protective chamfers: 0.1-0.3 mm x 45°
S2: AR(R<0.2%) @ 1029-1031 nm, AOI = 0°, 10J/cm²; 1030 nm; 10 ns
Laser engraved, height of separated characters 2 mm: 600-1 (according to drawing)
Perpendicularity to A surface: 0.01 mm (according to drawing)
S1/S2 Surface quality: 5/ 2 x 0.025 (10-5 S-D under concentrated light source)
Dimensions, mm: 8 x 6 (±0.1)
Grinded 6 x 3 mm sides Surface roughness: Rq < 4 μm
Laser engraved, height of separated characters 2 mm: 600-1
Material: C7979
Parallelism to B surface: 0.02 mm
Coatings:
Parallelism to B surface: 0.02 mm (according to drawing)
Chips: <0.1 mm
Perpendicularity to A surface: 0.01 mm
Grinded 8 x 3 mm sides Surface roughness: 2 μm < Rq < 4 μm